As previously stated, we don't formally certify Demand Forecasting with each release of D365FO.
Instead we architected the product to have few touch-points with D365FO as possible to ensure maximum compatibility with D365FO updates - both current D365FO updates and future D365FO updates.
This means that, subject to testing, done prior to installing any D365FO updates, customers should assume that new D365FO updates will generally be compatible with recent Demand Forecasting releases. This is subject to conducting normal pre-upgrade testing processes prior to any upgrades.
However we do conduct internal testing of D365FO updates from time to time, typically where the D365FO update is one of the twice yearly "major" updates (March and September updates), or where there have been changes (such as licensing changes) that we think may raise customer queries.
The information on this testing from the last 12 months or so of D365FO updates, is tabulated below.
This list is organised so it has the most recent D365FO updates listed first (so is in "reverse order"). As in formation about now superseded D365FO updates (or older Demand Forecasting releases) will be found towards at the bottom of the table, as they are likely least relevant to most customers, in the present day.
| D365FO Update/Release | Demand Forecasting Release(s) that were tested | Comments/Notes |
|---|---|---|
| 10.0.46 | 11.0.2.0 | No issues seen during testing with the either R11.0.2.0 or have been reported with the R10.0.9.2 standard Demand Forecasting releases. Compatibility testing for older Demand Forecasting releases prior to either R11.0.2.0 and/or R10.0.9.2 releases has not been performed on this D365FO update. We expect these older release will have issues however and only the Demand Forecasting releases from R10.0.9.2 or R11.0.2.0 will likely be compatible with this D365FO 10.0.46 update because of the issues experienced with D365FO update 10.0.45 with Copy to Final Forecast. Which affected all releases prior to R10.0.9.2 and R11.0.2.0. We strongly advise all customers that they should plan to upgrade to R11.0.2.0 first - if they are not already at this level and intend to update to D365FO 10.0.46. However customers on any older R10.0.9.1 or earlier releases can if update to R10.0.9.2 as a stop-gap measure. Before updating to D365FO 10.0.46. |
| 10.0.45 | 11.0.1.0 & 10.0.9.1 | An issue was seen during testing with both R11.0.1.0 or the R10.0.9.1 standard Demand Forecasting releases. When using the Copy to final forecast function when also splitting forecasts using period keys to split forecasts into smaller time periods. An 'Update conflict' error will occur on D365FO 10.0.45 when the prior forecasts are being deleted. We released R11.0.2.0 and R10.0.9.2 packages on 28 October 2025 that contain a fix for this issue. these packages are also compatible with earlier D365FO updates. Compatibility testing for older Demand Forecasting releases prior to R10.0.9.1 has not been performed on this D365FO update. But testing and actual customer incident reporting has shown that the same issue that exists with Copy to final forecast on D365FO 10.0.45 will exist on all older releases of Demand Forecasting if period keys are being used on D365FO 10.0.45. The only solution is to update to either: R11.0.2.0 or later package or update to the R10.0.9.2 package (which is available by request only - log a support request if you wish this update instead of R11.0.2.0). |
| 10.0.44 | 11.0.0.0 & 10.0.9.0 | No issues seen during testing with either the R11.0.0.0 or the R10.0.9.0 standard Demand Forecasting releases. Compatibility testing for older Demand Forecasting releases prior to R10.0.9.0 has not been performed on this D365FO update. We expect Demand Forecasting releases from R10.0.3.0 through to R10.0.8.0 will be compatible with this D365FO update This must be assessed and tested by each customer/or environment prior to updating to this D365FO update. For any releases older than R10.0.3.0 (whether a standard release, or customer specific release with custom modifications provided by Farsight present) compatibility is not assured but is likely. However, compatibility must be assessed and tested in each customer environment prior to updating to this D365FO update. |
| 10.0.43 | 10.0.7.0 & 10.0.8.0 | Minor issues were seen after initial testing with early versions of this update against all standard Demand Forecasting releases. Customers should always apply update 10.0.2177.83 or later to avoid these known issues, which mainly affected licensing. Compatibility testing for older Demand Forecasting releases prior to R10.0.7.0 has not been performed on this D365FO update. We expect Demand Forecasting releases from R10.0.3.0 through to R10.0.6.0 will be compatible. But this must be assessed and tested by each customer/site prior to updating to this D365FO update. For any releases older than R10.0.3.0 (whether a standard release, or customer specific release with custom modifications provided by Farsight present) compatibility is not assured. So, compatibility must be assessed and tested by/in each customer environment prior to updating to this D365FO update. |
| 10.0.42 | 10.0.7.0 | No issues seen during testing with this standard Demand Forecasting release. Compatibility testing for older Demand Forecasting releases prior to R10.0.7.0 has not been performed on this D365FO update. We expect Demand Forecasting releases from R10.0.3.0 through to R10.0.6.0 will be compatible with this D365FO update But this must be assessed and tested by each customer/or environment prior to updating to this D365FO update. For any releases older than R10.0.3.0 (whether a standard release, or customer specific release with custom modifications provided by Farsight present) compatibility is not assured but is likely. So, compatibility must be assessed and tested by/in each customer environment prior to updating to this D365FO update. |
| 10.0.41 | 10.0.6.0 | No issues seen during testing with this standard Demand Forecasting release. Compatibility testing for older Demand Forecasting releases prior to R10.0.6.0 has not been performed. We expect Demand Forecasting releases from R10.0.3.0 through to R10.0.5.1 will be compatible with this D365FO update . But this must be assessed and tested by each customer/environment prior to updating to this D365FO update. For any releases older than R10.0.3.0 (whether a standard release, or customer specific release with custom modifications provided by Farsight present) compatibility is not assured but is likely. So, compatibility must be assessed and tested by/in each customer environment prior to updating to this D365FO update. |
If you are using one of the older Demand Forecasting releases not listed as having been tested on the D365FO update you are targeting, and you are still unsure after reading the above. Then please seek assistance by raising a support ticket at the earliest opportunity prior to the upgrade, and ensure you provide the current Demand Forecasting release information and the current and planned D365FO update that is being targeted. So we can advise/assist.
Table last updated: 4 February 2026 by Greg Nikoloff.